Peristaltic pump drives, MCP-Standard / MCP-Process

Can be combined with over 20 pumpheads for flow rates of 0.001 to 3700 ml/min (depending on pump-head).
Combined peristaltic pump and precise dispenser. Microprocessor controlled, with precise controlled rotation speed and metering unit for 1 to 24 pump channels. The speed (1 rpm to 240 rpm) is adjustable to 0.1 rpm, key-pad with LED-display, programmable. Different dosing modes supply very exact and reproducible results. With RS232 interface, tubing valve operation, dosing handle and foot switch. Can be used for sterile dosing up to 135 °C (with adequate tubing).

Programmable functions:

• ml/min
• drive speed
• drop-free (roller reverse step)
• calibration ml/min (flow rate); ml (volume)
• drive unit on/off

Dosing:

• volume ml
• volume/time unit
• dosing time (0.1 s to 999 h)
• intermittend dosing with pre-set pause time;

number of dosing cycles selectable

Additonal functions MCP process:

• progammable sequences
• dust-tight and water-proof

• Specifications MCP-Process
• Motor type:
  Speed: d.c. motor
  1 to 240rpm
• Speed setting: rpm, resolution 0.1rpm
• Flow rate setting: µl/min, ml/min, l/min
• Power consumption:
  Power supply: 100W
  100 to 230V, 50 to 60Hz a.c.
• Protection rating: IP65
• Weight: 6.9kg (without pumphead)
• MCP-Standard
• Motor type:
  Speed: d.c. motor
  1 to 240rpm
• Speed setting: rpm, resolution 0.1rpm
• Flow rate setting: µl/min, ml/min, l/min
• Power consumption: 100W
• Power supply: 230V 50Hz; 115V, 60Hz a.c. selectable
• Protection rating: IP30
• Weight: 6.4kg (without pumphead)