Pumpheads for gear pumps BVP-Z, MCP-Z Standard and MCP-Z Process
User-specific pumping heads, drive magnets and two hose connectors are reqiured for operating the magnet-coupled gear pumps. Temperatures -45 to +177°C. If you want to operate pumps with teflon fitments at more than 54°C, please specify this in your order, because operation up to 99°C requires alternative seals. Please note: The flow rate depends on the model.
- magnets, see gear pump drives
- Service kits available on request
Further pump heads available on request.
Toote variatsioonid
| Type | Flow rate ml/min. | Gear material | Catalog number | PK | Kogus | |
|---|---|---|---|---|---|---|
| Z-130 | 40 - 3950 | PPS | 9.828 408 | 1.00 | ||
| Z-181 | 3 - 252 | Graphite | 9.828 413 | 1.00 | ||
| Z-140 | 40 - 3950 | PTFE | 9.828 409 | 1.00 | ||
| Z-200 | 35 - 3509 | PPS | 9.828 416 | 1.00 | ||
| Z-120 | 40 - 3950 | PTFE | 9.828 405 | 1.00 | ||
| Z-142 | 55 - 5460 | PTFE | 9.828 411 | 1.00 | ||
| Z-183 | 5 - 504 | Graphite | 9.828 414 | 1.00 | ||
| Z-122 | 55 - 5460 | PTFE | 9.828 407 | 1.00 | ||
| Z-201 | 70 - 7020 | PPS | 9.828 417 | 1.00 | ||
| Z-186 | 1 - 99 | Graphite | 9.828 415 | 1.00 | ||
| Z 150 | 33 - 3950 | PPS | 9.828 412 | 1.00 | ||
| Z-1830 | 6 - 560 | PPS | 9.828 418 | 1.00 |
