Impellers VISCO JET®
The worldwide patented VISCO JET® Mixing System is the result of the so-called cone-principle. Turbulent flows are created at the taper end by acceleration, displacement and retardation. These flows advance through the stirred medium and result in the new dynamic mixing motion.
- One system for literally all mixing tasks for low to high viscosity media
- Patented cone-principle creates even at low speeds a turbulent flow which is unique to the VISCO JET®
- Even with high-viscosity media and gels which naturally do not mix by using common impellers you will observe an immediate flow through the entire beaker
- This technology allows for de-gassing of gels while preventing air intake and foaming
- Reduce process times significantly while performing the best mixing result ever
The stirring systems are made of stainless steel (V4A or AISI 316 Ti) or polyoxymethylene (POM).
Toote variatsioonid
| Ø agitator shaft mm | Length mm | Material | For Vessels mm | Catalog number | PK | Kogus | |
|---|---|---|---|---|---|---|---|
| 10 | 500 | AISI 316Ti | 115-200 | 6.290 570 | 1.00 | ||
| 10 | 500 | V4A | 80-150 | 9.816 595 | 1.00 | ||
| 10 | 500 | POM | 170-300 | 9.816 599 | 1.00 | ||
| 10 | 500 | AISI 316Ti | 170-300 | 7.646 872 | 1.00 | ||
| 10 | 500 | POM | 115-200 | 9.816 597 | 1.00 | ||
| 10 | 500 | V4A | 115-200 | 9.816 596 | 1.00 | ||
| 10 | 500 | V4A | 170-300 | 9.816 598 | 1.00 |
