Conductivity cell probes TetraCon® 325

For all pocket measuring devices for analog measuring cells from the 3xx series, as well as all inoLab laboratory measuring devices for analog measuring cells.

Standard conductivity cell probe TetraCon^® 325:
4-pole cell with integral temperature sensor.

Special conductivity cell probe TetraCon^® 325/C:
As TetraCon^® 325, 4-pole cell with integral temperature sensor, but with sensor head made of chemically resistant PEEK.

Toote variatsioonid

Cable length	Cell constant	Shaft length	Material shaft	Max. pressure	Max. temperature	Min. temperature	Catalog number	Shaft Ø	Temperature	Temperature sensor	Type	PK
6 m	0.475 1/cm	120 mm	Epoxy	2 bar	80 °C	5 °C	7.008 435	15.3 mm	5 ... 80 °C	NTC 30 kOhm	TetraCon® 325-6	1.00
10 m	0.475 1/cm	120 mm	Epoxy	2 bar	80 °C	5 °C	7.008 436	15.3 mm	5 ... 80 °C	NTC 30 kOhm	TetraCon® 325-10	1.00
15 m	0.475 1/cm	120 mm	Epoxy	2 bar	80 °C	5 °C	7.008 437	15.3 mm	5 ... 80 °C	NTC 30 kOhm	TetraCon® 325-15	1.00
3 m	0.475 1/cm	120 mm	Epoxy	2 bar	80 °C	5 °C	7.008 434	15.3 mm	5 ... 80 °C	NTC 30 kOhm	TetraCon® 325-3	1.00
20 m	0.475 1/cm	120 mm	Epoxy	2 bar	80 °C	5 °C	7.008 438	15.3 mm	5 ... 80 °C	NTC 30 kOhm	TetraCon® 325-20	1.00
1.5 m	0.475 1/cm	120 mm	Epoxy	2 bar	80 °C	5 °C	9.704 081	15.3 mm	5 ... 80 °C	NTC 30 kOhm	TetraCon® 325	1.00
1.5 m	0.475 1/cm	120 mm	Epoxy	2 bar	80 °C	5 °C	6.229 561	15.3 mm	5 ... 80 °C	NTC 30 kOhm	TetraCon® 325/C	1.00

Liitu meie uudiskirjaga

Ole kursis oluliste uuendustega teadusmaastikul, seadmete eripakkumistega ning kasulike nippide ja trikkidega laboritöös.

Liitu