Digital force gauge FS

Force gauge with integrated measuring cell for tensile and compressive force measurement. If an external measuring channel is used, the internal load cell is deactivated as long as an external load cell is connected. Suitable for 4-wire and 6-wire sensors with strain gauges.

3,5″ touchscreen

Simultaneous measurement on up to four channels

Two-point adjustment with weights or numerical adjustment possible

External sensor data is stored directly in the connector

USB interface for programming, data transfer and power supply

Integrated SD card memory

Tolerance function

TRACK function for continuous display of the measurement

Peak value measurement

Rechargeable battery operation

Can be mounted on all SAUTER test stands

Scope of supply:
Force gauge, system case (systainer® T-LOC), plug-in power supply, USB cable type C

Toote variatsioonid

Depth	Height	No. of channels	Catalog number	Plug type	Readability	Width	PK	Display	Max. voltage	Min. voltage
31 mm	180 mm	2	4.691 189	EU	0,1 N	71 mm	1.00	Digital	240 V	100 V
31 mm	180 mm	2	4.691 185	EU	0,02 N	71 mm	1.00	Digital	240 V	100 V
31 mm	180 mm	2	4.691 187	EU	0,05 N	71 mm	1.00	Digital	240 V	100 V
31 mm	180 mm	4	4.691 191	EU	0,005 N	71 mm	1.00	Digital	240 V	100 V
31 mm	180 mm	4	4.691 192	EU	0,05 N	71 mm	1.00	Digital	240 V	100 V
31 mm	180 mm	2	4.691 188	EU	0,01 N	71 mm	1.00	Digital	240 V	100 V
31 mm	180 mm	2	4.691 186	EU	0,005 N	71 mm	1.00	Digital	240 V	100 V
31 mm	180 mm	4	4.691 194	EU	0,1 N	71 mm	1.00	Digital	240 V	100 V
31 mm	180 mm	4	4.691 190	EU	0,02 N	71 mm	1.00	Digital	240 V	100 V
31 mm	180 mm	4	4.691 193	EU	0,01 N	71 mm	1.00	Digital	240 V	100 V

Liitu meie uudiskirjaga

Ole kursis oluliste uuendustega teadusmaastikul, seadmete eripakkumistega ning kasulike nippide ja trikkidega laboritöös.

Liitu