Shore hardness testers, analogue, HB
Compact handheld durometer for plastics with drag indicator.
- Measurement of penetration depth (Shore)
- Material thickness of the sample, min. 6 mm
- Particularly recommended for internal comparison measurement. Standard calibrations e.g. to DIN 48-4 are not possible because of very narrow standard tolerances
- Can be attached to the test stands TI-AC (for Shore A and Shore A0) and TI-D (for Shore D)
- Max mode: Holds the maximum value in the display
- Point mode: Shows one instant value
- Screws to screw on to the TI: M7 fine thread
- Delivered in a plastic carrying case
Shore A: rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials
Shore A0: foams, sponges
Shore D: plastics, synthetic resin, Resopal®, epoxides, Plexiglas® etc.
Toote variatsioonid
| Catalog number | PK | Depth | Display | Height | <th class='MaterialReadability | Tolerance | Type | Weight | Width | Dimensions (WxDxH) | Measured range | Kogus | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6.284 083 | 1.00 | 25 mm | Analogue | 115 mm | <td data-title='Material1,0 HA | 3 % | HBA 100-0 | 160 g | 60 mm | 60 x 25 x 115 mm | 100 HA | ||
| 6.270 975 | 1.00 | 25 mm | Analogue | 115 mm | <td data-title='Material1,0 HD | 3 % | HBD 100-0 | 160 g | 60 mm | 60 x 25 x 115 mm | 100 HD | ||
| 6.312 365 | 1.00 | 25 mm | Analogue | 115 mm | <td data-title='Material1,0 HA0 | 3 % | HB0 100-0 | 160 g | 60 mm | 60 x 25 x 115 mm | 100 HA0 |
