Stirrer Bearings, PTFE
The sealing rings on these bearings ensure a perfect sealing. The ground joint no longer sticks, the danger of breaking is reduced and the cone can be removed easily from the socket. A special gasket made of PTFE and an FPM o-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing. Suitable for vacuum, perfect bearing for stainless steel, glass and BOLA Stirrer Shafts.
Toote variatsioonid
| For diam. stirring rod mm | Cone NS | Overall length mm | Thread GL | Catalog number | PK | Kogus | |
|---|---|---|---|---|---|---|---|
| 8 | 24/29 | 69 | 25 | 6.251 738 | 1.00 | ||
| 10 | 45/40 | 80 | 25 | 6.800 985 | 1.00 | ||
| 6 | 19/26 | 63 | 18 | 6.900 411 | 1.00 | ||
| 6 | 29/32 | 72 | 18 | 6.087 538 | 1.00 | ||
| 8 | 29/32 | 74 | 25 | 6.076 532 | 1.00 | ||
| 10 | 24/29 | 70 | 25 | 6.253 704 | 1.00 | ||
| 10 | 29/32 | 72 | 25 | 6.088 058 | 1.00 | ||
| 16 | 45/40 | 86 | 32 | 6.232 941 | 1.00 | ||
| 8 | 19/26 | 65 | 25 | 6.233 200 | 1.00 |
